Gutter Cleaning Greenwich
If rainwater spills around a hopper head at your Greenwich address, tell us whether you see it enter from a pipe above or reach the wall from a gutter edge. We clear accessible gutters with a high-reach vacuum and inspect visible runs and outlet positions with a pole camera.
- Identify each visible pipe feeding the rainwater head
- Locate the highest point where water leaves a fitting
- Check accessible upstream channels before discussing the hopper
- Describe a lower connection independently from roof overflow
Is a hopper the same thing as the gutter outlet?
A hopper can receive water from a gutter outlet, another pipe or more than one route. Give us a view of the open fitting and the pipes feeding it if they can be seen safely. Tell us which one appears to spill first so we can discuss where an accessible gutter check starts.
What if water runs down the wall below a rainwater head?
Say whether it comes over the top, escapes at a visible join or appears only lower on the wall. A photo from ground level showing the highest wet point and the fitting helps us discuss the accessible parts of the route. Let us know if the hopper sits above a busy entrance or a lower roof.
Identify what feeds the visible rainwater head
Some fittings are easy to see from the ground, while the channel feeding them may be hidden above a roof edge. Tell us what you know about the pipes and lengths connected to the head. A wide view can show whether the hopper receives water from a separate gutter or another visible pipe. Explain if the overflow appears during a heavy shower or if a drip remains at the same fitting afterwards. We use the pole camera on reachable gutters to see what is in the channel and around the visible outlet. The account from ground level helps us match the gutter to the position where you saw water.
Check the upstream channel before discussing the fitting
A visible hopper that spills can draw attention away from an earlier obstruction. If a nearby gutter crosses another elevation, tell us whether that length also fills or whether water appears only where it enters the head. We look at accessible channels and vacuum debris such as leaves, moss and silt. We then check the cleared gutter again. If we see a join that appears open or a displaced length, we can explain which fitting is involved. A camera view from the ground may not reach around every bend or show what happens inside a pipe, so we explain which parts can be seen from the available position.
What to discuss before the visit
| Rainwater part | Observation to share |
|---|---|
| Gutter feeding the hopper | Whether water crosses its edge before reaching the head |
| Visible head | Whether it spills at the top or leaks from behind |
| Pipe leaving the head | The first wet join or change of direction |
Plan how the operator will reach the space beneath it
At a house, the relevant gutter might be above the path to a garden or behind a rear addition. Show us the side route and explain what sits immediately below the rainwater head. If several flats share a courtyard, tell us who can open it and which residents use the approach. At business premises, give a contact who can explain deliveries and whether the area below the affected gutter is used throughout the day. If the nearest entrance leads to a different elevation, give the name of the actual gate or door needed. That helps us discuss the working position before the visit.
Describe a visible defect at the right level
If water emerges where a pipe leaves the hopper, locate that connection separately from the gutter above it. Tell us if you can see an open seam, a crack or a section that has shifted. A wide picture can show which fitting you mean, even if the defect itself is hard to photograph from below. After vacuuming accessible material we look along the channel again and explain what we can see. If the same fitting continues to drip when debris is gone, ask about gutter repairs. Explain whether another person needs to approve the work and if they need the location of the defect or a visual record.
Consider a record if more than one roof edge is involved
Someone responsible for the building may want to see what feeds the fitting before agreeing to further work. Discuss a video survey if the accessible channel needs to be shown. Identify whether the person wants a view of the straight run, a corner or the opening into a pipe. A recording can only show what the camera can reach and see. It can be useful to give the same names to each roof edge in the booking and the footage discussion. If one run belongs to a separate occupier, tell us who can agree access and what that person knows about the overflow.
Details that guide our checks
| Location below the fitting | Booking detail |
|---|---|
| Lower addition | Space beside the roof and the possible camera angle |
| Shared courtyard | Which residents use it and who controls access |
| Commercial entrance | The person who can explain when the approach is used |
Other Property Services in Greenwich
Ask about gutter repairs if a visible head, connection or section appears damaged or out of position. If the owner needs a camera view of a reachable length, we can discuss a video survey before booking. Window cleaning can be considered separately for exterior glass below the rainwater route. Give the floor, position and any lower roof or projection in front of it. If ivy has grown round a pipe or reaches the gutter edge, ask about ivy removal and describe the extent of the growth. Give the postcode and explain the space available for each service so we can confirm what can be arranged.
Coverage near Greenwich
For another address, check the London and M25 coverage guide or contact us with the postcode.
Questions about gutter cleaning in Greenwich
Can you tell where the water comes from if the hopper has two pipes entering it?
Tell us which pipe or roof edge appears to feed it during rain, if you can see that safely. Give the position of both connections and the gutter levels above them. We can discuss the accessible sections and the parts visible from the ground.
What if water appears behind the hopper instead of at the top?
Describe the highest wet point and whether the water starts at a join or travels along the wall first. A picture showing the fitting against the wall helps us locate it. We can discuss checking the visible connection separately from the gutter.
Can I ask you to look at only the gutter feeding the hopper?
Yes. Identify the length and tell us how it can be reached. If the hopper receives water from another run, mention that so we can distinguish the agreed gutter from any other fittings you have observed.
Will a rear addition affect the camera angle?
It can if it stands between the ground and the gutter. Show us how far the lower roof extends and where there is space beside it. We can discuss which parts of the channel can be reached from the available position.
Who should be present when the fitting is above a commercial entrance?
Give us the contact who can point out the fitting and explain how the area below is used. If someone else controls deliveries or opens a gate, tell us their role and confirm that they know which approach has been agreed.
Can a survey show what is happening inside the downpipe?
The pole camera can check reachable gutters and what is visible around the outlet. It may not see the full inside of a pipe, particularly if there is a bend or a concealed length. Tell us what you need to see before you book.
Describe the hopper or outlet at your Greenwich property
Give the postcode, the gutter edge or pipes feeding the fitting and the highest place where water appears. Tell us which route can be used and who can admit us to the space below.
Gutter cleaning, repairs and camera surveys for homes and businesses across London and the M25.